Choosing the Right Microphone Article by Damian Codotto
Imagine this. You've got a session booked with one of the hottest bands in town. The instrument tracks were recorded yesterday and they will
be arriving at your studio in a few hours to begin tracking the all important vocals for the first single of their new album. You've got
all the mics layed out carfully and you reach for your trusty ol' vintage workhouse. You set up your recording chain: mic into pre-amp, pre-amp
into compressor (if you're into that sort of thing) and then compressor into your sweet sounding Apogee convertors. You prep the console.
It's all ready to go.
One microphone does not fit all.
It's like trying to see clearly through someone elses prescription glasses instead of your own (well, I imagine it would be; I haven't needed to wear prescription glasses) Each mic has a distinct sound. Some mics have a subtle distinction and others are more pronounced. Some may sound harsher or more cold or trebly, and others may sound rounder or more warm with a deeper feel.
Which Mic for Which Vocalist?
So how do you determine which mic should be used for a particular vocalist?
The best way is to grade the harshness of the mic and the vocalist on a scale of 1 to 10. 1 is super harsh and 10 is super rounded and warm. 5 is of course middle ground where equal amounts of of both treble and depth are displayed.
Grade all your mics first, before the vocalist arrives. Keep a record of your mics harshness rating. Write it down somewhere and file it away for future use. Trust me, it is going to prove very handy in the future.
Now, with your vocalist in the studio, have him or her sing some warm up exercises. Listen. Listen again. Keep listening. Move around the room a little. Bring your ear closer to their mouth (not too close - you may get punched in the noggin). What harshness rating is your vocalist? Are they a 3 or a 4. Maybe they are an 8. Once you've graded your vocalist on a scale of 1 to 10, you simply choose a mic that is on the opposite side of the scale. For example, if my vocalist has a harshness factor of say 4, then I should choose a mic that has a harshness factor of 6. This will ensure the resulting sound hitting your tape (or hard drive) is as balanced as possible.
The results will be nothing short of stunning. I read about this technique a while back (from Audio technology Magazine I think) and it's helped me get some superb vocal tracks
About the Author - Damian Codotto runs a recording studio in northern Australia. He also runs www.prosoundsdirect.com - An affordable pro loops & samples website.<< prev - Articles Home - next >>
Recording Microphones - Article Directory
- Recording a Choir - Location and Microphone Techniques to make high quality choir recordings.
- Recording Drums - The best ways to record Bass and Snare Drums.
- Recording a Guitar Amplifier - How to mic up a Guitar Amplifier.
- Recording Audio for a Website - Top Tips for buying a microphone to record website audio.
- Cordless Microphones - Buying a cordless / wireless microphone - thing to look for.
- Understanding Compression - Using a compressor to get the most out of your microphone.
- Choosing the Right Microphone - Picking the right mic for a recording session.
- Headsets Microphones - choosing the right one.
- Microphones for Stage and Live - Best practices when using mics for live work.
- Sennheiser MX 500 Earbuds - Product Review
- Shure E2 Earbud - Product Review
- Things To Look For When Buying A Karaoke Microphone
- Shure SM 7 - dynamic microphone review
Recommended Books | Recording Articles | Links / Manufactures